Daily checks, monthly tests and an annual inspection by a qualified technician. Here is what the Ontario Fire Code requires, in plain language.
Short answer: every day, every month, and every year. The Ontario Fire Code asks building owners to do a quick daily check of the fire alarm panel, test parts of the system every month, and have a qualified technician inspect and test the whole system once a year.
Below is what each check means, who can do it, and what records you need to keep. It is written for property managers, condo boards and building owners, not technicians.
| How often | What to do | Who usually does it |
|---|---|---|
| Daily | Look at the fire alarm panel. Make sure the power light is on and there is no "trouble" signal. | Building staff or superintendent |
| Monthly | Test the system and check its parts, including the standby batteries and at least one alarm device such as a pull station or detector. Test the voice paging system if you have one. | Trained building staff or a fire alarm company |
| Annually | Full inspection and test of the entire fire alarm system to the CAN/ULC-S536 standard, with a written report. | A qualified fire alarm technician (usually CFAA certified) |
Once a day, someone should look at the main fire alarm panel (and the annunciator, if your building has one) and confirm two things:
A trouble signal means part of the system may not work in a real fire. It could be a disconnected device, a ground fault, a low battery or a communication problem. It should be fixed right away, not left for the next inspection.
Example: a superintendent sees "TROUBLE – Zone 3" on the panel on Monday. If nobody calls a technician, that floor could be unprotected for weeks.
Every month, part of the system is tested so that problems are caught between annual inspections. The monthly routine usually includes:
Many buildings do these monthly tests with their own trained staff. Others hire a fire alarm company to do them, especially larger buildings, condos and buildings with complex systems.
Once a year, the whole fire alarm system must be inspected and tested by a person with qualifications acceptable to the fire department. In Ontario this is normally a CFAA certified fire alarm technician. The work is done to CAN/ULC-S536, the Canadian standard for inspecting and testing fire alarm systems.
A proper annual inspection includes:
If the report lists deficiencies, the owner must have them corrected. Fire departments and insurance companies often ask to see both the report and proof that deficiencies were fixed.
The Ontario Fire Code requires written records of every test and every repair. In simple terms:
A simple binder or logbook near the panel works well. Write down the date, what was checked, who did it, and anything that was fixed.
Nexofire does annual inspections to CAN/ULC-S536, monthly testing and deficiency repairs, and keeps your records ready for the fire department and your insurer.
From years of inspecting and servicing fire alarm systems across the GTA and Ontario, these are the problems we find most often:
None of these are hard to fix, but each one can lead to a failed inspection, a fire department order, or a problem with your insurance if something happens.
This article is general information to help building owners and property managers understand the basics. Always follow the current Ontario Fire Code and any direction from your local fire department.
Send us your last inspection report and we will give you a free quote. Deficiencies on the report? We fix those too, often the same week.
Our team responds fast. Fill out the form and we'll get back to you within hours.
Our team will review your details and be in touch shortly. A confirmation email is on its way to you now.
For a faster response call us directly on
365-374-2205
Something went wrong sending your request. Please call us on 365-374-2205 or email info@nexofireprotection.ca.