Services
CFAA certified · Notifier · Simplex · Edwards · Mircom
Serving the GTA and all of Ontario
Call 365-374-2205Free estimate
Fire Alarm Guides

Monthly Fire Alarm Testing in Ontario: Simple Step-by-Step Checklist

Ontario buildings need small fire alarm checks every day and every month, not just once a year. Here is exactly what to do each month, in 10 easy steps.

By Parth Patel, CFAA certified fire alarm technician · Nexofire Safety Inc. · November 16, 2026

Quick answer: once a month, tell the monitoring company, warn the people in the building, then activate one pull station (a different one each month), make sure the bells/horns and strobes work everywhere, check the panel batteries, confirm the signal reached the monitoring company, reset the system and write everything in the log book. It takes about 30 to 60 minutes in most buildings.
Rather have a technician do it? Call 365-374-2205 — a CFAA certified technician answers, and same-day service is available across the GTA and Ontario.
Monthly Fire Alarm Testing in Ontario: Simple Step-by-Step Checklist – Nexofire guide

Many property managers think the fire alarm only needs to be checked once a year. In Ontario, that is not true. The Fire Code also expects daily and monthly checks. This guide shows you exactly what to do every month, in simple steps, with a checklist you can print.

Daily, monthly and yearly: what is the difference?

How oftenWhat to doWho usually does it
Every dayLook at the fire alarm panel. Only the green AC Power light should be on. No trouble or alarm lights.Superintendent or building staff
Every monthTest one pull station, check that bells/horns and strobes work, check batteries and the monitoring signal, record it.Trained building staff or a fire alarm company
Every yearFull inspection and test of every device to CAN/ULC-S536, with a written report.Qualified fire alarm technician only

Before you start: what you need

The monthly test: 10 simple steps

  1. Check the panel is normal before you start. Only the green AC Power light should be on. If you see a yellow TROUBLE or SUPERVISORY light, write it down and fix that first. (See: Fire alarm panel showing trouble? What to do)
  2. Call the monitoring company and put the system "on test". Give your account number and say how long you will test, for example 1 hour. This stops the fire department from being sent to your building.
  3. Warn the people in the building. Put a notice in the lobby and elevators a day before, and make a short announcement before you start: "This is only a test of the fire alarm." This avoids panic and 911 calls.
  4. Activate one pull station. Pick a different pull station each month so that over the year you test them all in rotation. Write down which one you used (for example "Pull station, 3rd floor, east stairs").
  5. Check the panel shows the alarm correctly. The red ALARM light should come on and the screen (or annunciator) should show the right device and location. If it shows the wrong location, write it down. This needs a technician.
  6. Check bells/horns and strobes are working. Walk the building or ask your helper to check. Every area should hear the alarm sound and see the strobes flashing, including washrooms, stairwells and the parking garage. Note any area where it is too quiet or a strobe does not flash.
  7. Check that the doors and fans do what they should. In many buildings the alarm also releases magnetic door holders, shuts down air handling fans or calls the elevators down. If your building has these, check that they work.
  8. Confirm the monitoring company received the alarm. Call them back and ask: "Did you receive the alarm signal from our building?" If they did not, your monitoring connection has a problem. Call your fire alarm technician.
  9. Reset everything and check the batteries. Reset the pull station with the key, then reset the panel. Wait until only the green light is on. Look at the panel batteries: no leaking, no swelling, terminals clean, and check the date on them (most last 3 to 5 years).
  10. Put the system back in service and record it. Call the monitoring company to take the system off test. In the log book, write the date, time, which pull station you used, what worked, any problems, and your name.

Don’t have time to do monthly tests? We can do them for you.

Nexofire does monthly fire alarm testing for condos, offices, plazas and retirement homes, with a clear digital record every month. Ready for any fire inspector.

  • ✓ Same-day service for most trouble and repair calls
  • ✓ CFAA certified technicians · Notifier, Simplex, Edwards, Mircom
  • ✓ Free quotes · clear digital reports · serving the GTA and all of Ontario

Common mistakes we see

MistakeWhy it is a problemWhat to do instead
Not calling the monitoring companyThe fire department arrives and you may be charged for a false alarm.Always put the account on test before you start.
Testing the same pull station every monthOther pull stations are never tested and may not work in a real fire.Use a different one each month and write down which.
Not writing it downIf it is not in the log book, the fire inspector sees it as "not done".Record every test, even when everything is OK.
Ignoring small problemsA quiet horn or a dead strobe means people may not get the warning.Write it down and get it repaired quickly.
Leaving the system on testIf a real fire happens, the fire department is not called automatically.Always call back to put the system in service.

What should be written in the log book?

Other monthly checks many buildings forget

Simple monthly checklist (print this and keep it at the panel)

This article is general information to help building owners and property managers. Requirements can depend on your building and system. Always follow your building's fire safety plan, the current Ontario Fire Code and CAN/ULC-S536, and any direction from your local fire department. If you see or smell fire or smoke, call 911.

Make monthly testing one less thing to worry about

Our technicians test, record and fix problems in one visit, on Notifier, Simplex, Edwards, Mircom and other panels. One fixed monthly price, no surprises.

  • ✓ Same-day service for most trouble and repair calls
  • ✓ CFAA certified technicians · Notifier, Simplex, Edwards, Mircom
  • ✓ Free quotes · clear digital reports · serving the GTA and all of Ontario

Frequently asked questions

Is monthly fire alarm testing required in Ontario? +
Yes. The Ontario Fire Code requires fire alarm systems to be checked and tested regularly as set out in CAN/ULC-S536. That includes daily, monthly and annual checks, not only the yearly inspection. Records must be kept.
Can building staff do the monthly fire alarm test? +
In many buildings, trained building staff or a superintendent can do the simple monthly checks, as long as they know the system and keep proper records. The annual inspection must be done by a qualified fire alarm technician. Many owners hire a company for monthly tests to make sure it is done right every time.
Do I need to tell the monitoring company before testing? +
Yes. Always call your monitoring company before you test and put the account on test. Otherwise the fire department may be sent to your building. Call them again after the test to put the system back in service.
How long should I keep fire alarm test records? +
Keep your daily, monthly and annual fire alarm records in the building, usually in the fire alarm log book, and keep them for at least two years or longer if your fire safety plan says so. Fire inspectors often ask to see them.

← More fire alarm guides · Our inspection service

Book Your Fire Alarm Inspection Today

Fast, professional, and fully code-compliant inspections across the GTA and Ontario.

Contact Us

Need Help With
Your Fire Alarm?

Our team responds fast. Fill out the form and we'll get back to you within hours.

Service Area
Greater Toronto Area & Ontario
Emergency
24/7 — 365 Days a Year
Get a Free Estimate

We typically respond within a few hours. For emergencies call 365-374-2205.

24/7 Emergency — 365-374-2205
Call 365-374-2205Free estimate